ROBERLO SN96 METALLIC POLYESTER 1.3KG With HARDENER

ROBERLO SN96 METALLIC POLYESTER 1.3KG With HARDENER

- Increased hardness due to Aluminum Flake reinforcements in the Putty itself

- Designed to seal welded parts

- Repair rusted areas of bodywork

- Re-threading of any body parts

- To be applied on any metallic part that requires structural strengthening, reinforcement of any sort

- Apply on Epoxy Primer if maximum protection is required

- Start initial Sanding (P80 Grit), and end with Final Sanding (P150 Grit)

- Low VOC content of 26 g/L ensures minimal air pockets will be formed between putty layers when solvents have escaped and evaporated within the Putty itself

SN96 Metallic Polyester Putty is recommended to be isolated with Plus 30 Standard Polyester Putty before the application of Primer Filler.

SN96 Metallic Polyester Putty, like any BPO (Benzoyl Peroxide) Putty, can be applied to a very thick layer, but it has to be built up layer by layer to your desired thickness. Applying to an extremely thick layer at one go will result in air pockets forming within layers, thus resulting in side-effects.

Roberlo, Changing Colour Values.

Permanence Solutions, Selling Knowledge, Reinventing Industry Norms.